Melt Flow Indexer Extrusion Plastometer

Model

AT-P6003

Testing method

MFR, MVR

Temperature control

RT-300℃, RT-400℃ (optional), RT-500℃(optional)

Temperature fluctuation: ±0.5℃

Temperature uniformity: ±1℃

Temperature display resolution: 0.1℃

Temperature recovery time: less than 4 minutes

Standard die

Φ2.095±0.005mm

Length: 8.000mm±0.025mm

Cylinder

Internal diameter: 9.550mm±0.025mm

Length: 152mm± 0.1mm

Material: Wear resistance and corrosion resistance

Hardness not less than 500(HV5~HV100)

Piston

Head length: 6.350mm±0.100mm

Diameter of head: 9.474mm±0.007mm

Weight precision

±0.5%

Test results

Automatic calculate results and print out

Material cutting method

Manual and automatic integration

Position detection

Loop distance from up and down: 30mm

Control precision: ± 0.1mm

Test flow control

Times of cutting of material: 0~10

Material cutting interval

0~999S

Time display resolution

0.1S

Control flow reaches the set temperature without volatility

Barrel temperature time: 15min

Material be installed: 1min

Material sample temperature recovery time: 4min

When binder set: 1min

Testing Load

8 grade in total, (8 sets weights)

Power supply

AC220V±10%   50Hz/60Hz or specify

Accessories

• Main Machine  1 set  (built-in mini- printer)
• Weight (8 sets):  0.325kg, 1.200kg, 2.160kg, 3.800kg, 5.000kg, 10.000kg, 12.000kg, 21.6kg   (in the 1st load)
• Weights tray  1pc   (in the 1st load)
• Piston rod: 1pc  (in the 1st load)
• Standard die:  tungsten carbide
• Material Charging hopper:  1pc (Stainless Steel)
• Material Charging rod: 1pc
• Cylinder cleaning rod: 1pc
• Standard Die cleaning bar 1pc  (Stainless Steel)
• Cleaning Gauze:  2 Rolls
• Print paper: 2 Rolls