Model

AT-L5001

Force applied range

0~20KN

Crush speed

1.5cm/s, the speed range is 0.01~900mm/min adjustable (0.01~1.5cm/second)

Drive method

Servo motor and driver

Crush travel

0~300mm

Test Space

More than 300X300X300mm (WxDxH)

Force accuracy

+/- 0.5%

Crush retention time

0~9999 Sec adjustable

Control mode

Professional test software control on the computer

Battery crush test conditions

During the test, as long as any one of the following conditions is met (whichever comes sooner), the equipment relieve pressure and complete the crush test

1. Applied Crushing force up to (13±0.78)kN

• The voltage of battery drops by at least 1/3 or 100mV
• The cell is deformed by 1/10 or 50% of its original thickness.

Test software feature

1. With 1 channel of voltage acquisition

   Voltage acquisition resolution: 5mV

   Voltage acquisition range: 0~10V

2. The test software with real time monitoring of battery voltage changes, the force applied to battery and deformation of battery

3. Battery temperature acquisition is optional with exact cost

Test chamber structure

The test chamber is separated from the control cabinet

The test chamber door can slide up and down and with door lock

and the test area has 2 wire holes, a lighting lamp, an exhaust fan, and a pressure relief port.

Crush head size: 15cm diameter crush plate